English
The harder part is to verify a Chinese marble supplier and make sure its quotation and actual marble refer to the same product before you commit to the order. For an overseas buyer, the process comes down to six questions: Who actually controls the material, fabrication and quality control? Which marble blocks or slabs are available for your order now? Are competing quotations based on the same sp...
Quick Answer For a U.S. marble shipment, customs preparation should start before the container leaves the factory. Your broker needs a clear description of the goods, their processing state, country of origin, a reviewed HTS classification, and commercial and packing information that describe the same shipment. For ocean freight, key ISF information is required before or around shipment departure,...
Quick Answer A typical 20ft container carries about 430 m² of 20mm marble slabs or 275–280 m² of 30mm marble slabs. For slabs around 2800 × 1800 mm: 20mm / 2cm: about 85 slabs 30mm / 3cm: about 55 slabs Marble containers are planned by weight, not by cubic space. At Excellent Stone we normally plan a 20ft marble container at around 25 tonnes of cargo, not the container's theo...
Quick Answer Resin in a marble slab is a statement about what the stone needed, not about what the stone is worth. On many marbles, filling is the normal way the material is made usable at all, and the presence of resin says less about quality than which marble you are looking at. The question that does work is whether the fill matches the material rather than how much of it there is, and the marb...
Quick Answer Buying direct starts to make sense when your marble demand becomes predictable: you reorder the same varieties, need several varieties in one shipment, want control over the actual slabs, or have enough project volume to justify buying closer to the source. A local slab yard still has the advantage when you need a few slabs quickly and do not want to carry inventory. The practical dec...
Quick Answer For a bulk marble slab order, contractors should first confirm that the supplier has enough suitable material for the project, then check the actual slabs, visual lot, fabrication route, pricing, reservation terms, and delivery schedule. If the final slab count is not yet confirmed, involve the fabricator before finalizing the quantity or keep it provisional in the order. The goal is ...
Quick Answer By the time this decision comes up, the material is usually settled and the drawings already exist. The question is whether to ship slabs and fabricate them locally, or send the drawings to the supplier and receive finished cut-to-size pieces. For projects with reasonably stable drawings, we usually prefer fabrication at origin when the stone is sourced in Shuitou, China. Material sel...
Quick Answer A gang saw cuts a marble block with a frame of blades moving back and forth. A multi-wire saw uses diamond wires running continuously around pulleys. Both cut many slabs at once, so the differences that matter commercially are how much stone each cut removes and what surface it leaves behind. Multi-wire can recover more material from the same block, but only where its actual cutting g...
Quick Answer Look for cracks first, and for whether the stone around them is sound. Next, confirm that the slabs you are being shown are the slabs that will ship. Then get size, thickness and flatness as measurements rather than as descriptions. After those: the quality of the repair work, and how colour and veining hold up across the whole batch instead of on the best slab in it. That order follo...
Categories
New Blog
ROOM 205,NO.45, MIDDLE HAIJING ROAD,XIAMEN,AREA OF PILOT FREE TRADE ZONE(FUJIAN)OF CHINA
For inquiries about our products or pricelist, please leave to us and we will be in touch within 24 hours.
© Copyright: 2026 XIAMEN EXCELLENT STONE CO.,LTD. All Rights Reserved.
IPv6 network supported
