Wholesale Old Spray white China Grey Granite

For an order combining slabs, thin panels and drawing-based components, compare available formats through our granite products for fabrication and project supply before fixing the material schedule.

A Stronger White-Grey Pattern for Visible Project Surfaces

Old Spray White is not a uniform pale-grey granite. Large white crystalline areas sit within dense black and grey movement, producing a more expressive surface for reception panels, stair packages, countertop blanks and other visible interior pieces. The broad pattern makes full-piece approval important because a small sample cannot show how the movement will read across a long tread or large slab.

For a lighter Chinese material with longer cloud-like movement and larger published slab formats, compare Chinese Wiscon White Granite slabs before approving the final vein scale and fabrication plan.

One Batch for Treads, Risers, Sills and Matching Panels

Project buyers often need more than slabs. Stairs, landings, door sills and window sills must arrive in matching material, but each component has a different thickness and item code. Producing these pieces from one approved colour range reduces the risk of installing unrelated grey tones across the same entrance, staircase or interior package.

For a finer and more uniform white-grey slab alternative, review G439 Original Granite slabs before selecting between strong wave movement and a quieter project background.

Confirm the Pattern and Edge Finish Before Bulk Production

Polished white-grey granite can look different as lighting moves across the surface. The production view below helps buyers judge the contrast between white crystals and darker movement, the repeatability of finished pieces and the continuity of rounded edges before approving a bulk slab or component order.

Old Spray White Granite Slab and Cut-to-Size Specifications

Plan the Cutting Around Visible Pattern Movement

Old Spray White contains larger white crystals and stronger dark movement than G603 or G439. Long components cut from different slab zones may therefore look noticeably different. Connected treads, risers, panels or countertop pieces should be assigned from an approved batch and, where possible, recorded by slab or production-lot number.

For wide panels, state the required visual orientation and whether movement should run horizontally or vertically. For stairs and sills, decide whether the buyer accepts a mixed natural range or wants adjoining pieces grouped by similar background and pattern density.

Use Separate Item Codes for Every Component

Quality Control and Wooden-Crate Packing

• Material naming: confirm Old Spray White / Seawave White / Breaking Waves Granite against the approved current sample.
• Pattern range: check white crystal size, dark-wave density and the acceptable variation between pieces.
• Dimensions: verify length, width, thickness, diagonal and written tolerances.
• Surface: inspect polish consistency and visible marks under suitable lighting.
• Edges: check full-bullnose or other exposed edges, polished ends and transitions.
• Component labels: identify slab, panel, tread, riser, sill, landing or kitchen item by code and quantity.
• Packing: separate polished faces, protect rounded edges, reinforce long pieces and label every fumigated wooden crate.

Old Spray White Granite FAQ

Is Old Spray White also called Seawave White Granite?

Yes. The current page also uses White Wave, White Spray, Sea Wave Flower, Hailang Hua and Breaking Waves Granite. Confirm the material with the current full-size sample.

Are polished Old Spray White slabs available?

Yes. The current images show polished slabs and large panels. Actual slab dimensions are not published and must be confirmed from current stock.

Can the material be supplied as stair treads and risers?

Yes. Treads are listed at 1250–2200 × 340 × 30 mm and risers at 1250–2200 × 140–150 × 20 mm, with custom sizes available.

Are kitchen-top blanks also available?

Yes. The listed reference is 2200–2400 × 630 × 20 mm with full-bullnose edges or custom dimensions. No standard sink or cooktop opening is published.

Can matching door and window sills be included?

Yes. Door and window sill references are listed in different thicknesses. Quote each component with its own size, edge and quantity.

Is a fixed dimensional tolerance already published?

No. Add the required length, width, thickness, diagonal and edge tolerances to the order specification before production.