Tema Grey granite is supplied quarry-direct from Ghana for 7-inch solid steps and 2-inch stair treads. Standard lengths are 3–8 ft, with common tread depths of 12, 14, 18 and 24 inches; custom sizes are cut from project drawings. Recommended outdoor finishes are thermal or flamed tops with rock-faced, split-faced or sawn edges. Production capacity reaches 1,000 m² per day with 10 cutting machines. Bulk orders are inspected, packed in seaworthy wooden crates and shipped from Tema Port.
Item NO.:
Quarry-Direct Tema Grey Granite Steps & TreadsPayment:
30% as deposit,balance paid before deliveryProduct Origin:
GhanaColor:
Light Grey / Salt and Pepper GreyShipping Port:
Tema PortLead Time:
25 days after deposit receiptTema Grey granite, also known as Ghana G603 or Ghana Salt and Pepper Granite, is supplied quarry-direct from Ghana for outdoor stair, entrance and landscape projects. As a granite steps and treads supplier, we manufacture and wholesale standard and cut-to-size stair components for contractors, distributors, landscape suppliers and project buyers.
The table below compares the main purchasing specifications for solid granite steps and granite stair treads. Dimensions can be adjusted according to project drawings and installation requirements.
| Specification | Solid Granite Step | Granite Tread |
|---|---|---|
| Product Structure | Thick solid stone unit forming the stair tread and visible riser | Thinner stone component installed over a prepared structural stair base |
| Typical Thickness | 7" / approximately 180 mm | 2" / approximately 50 mm |
| Custom Thickness | Commonly 6"–8" / 150–200 mm | Commonly 1.5"–3" / 40–75 mm |
| Common Length | 3'–8' / approximately 914–2438 mm | 3'–8' / approximately 914–2438 mm |
| Common Depth | 14"–24" / approximately 356–610 mm | 12", 14", 18" or 24" / approximately 305, 356, 457 or 610 mm |
| Recommended Top | Thermal or flamed finish | Thermal or flamed finish |
| Front Edge | Rock-faced or split-faced | Rock-faced, split-faced or sawn |
| Exposed Ends | One or two short ends can be finished as required | One or two short ends can be finished as required |
| Fabrication Basis | Cut to stair dimensions, schedules or project drawings | Cut to stair dimensions, schedules or project drawings |
Custom dimensions should be confirmed against the final stair layout, installation base and required exposed edges before production.
The standard outdoor combination is a thermal or flamed top with a rock-faced front edge. It provides a textured walking surface while keeping the visible front of the step natural and substantial.
| Finish | Purchasing and Application Notes |
|---|---|
| Thermal / Flamed Top | Recommended for outdoor stair surfaces and commonly combined with a rock-faced or split-faced front. |
| Bush-Hammered Top | Creates a more visibly textured surface for landscape, public-space and commercial stair projects. |
| Sandblasted Top | Provides a relatively even matte texture when a softer visual appearance is required. |
| Rock-Faced Front | Produces a rough natural front edge commonly used on thick exterior steps and landscape stairs. |
| Split-Faced Front | Suitable for natural stone landscapes and projects requiring a less mechanically uniform exposed edge. |
| Sawn Edge | Provides straight architectural lines for modern entrances, built stairs and precise joint layouts. |
Tema Grey granite is sourced and processed in Ghana, reducing unnecessary material transfers between the quarry and cutting facility. Blocks can be selected and fabricated into solid steps, treads and related stair components according to approved dimensions.
| Material Origin | Ghana |
| Supply Model | Quarry-direct block supply and cut-to-size processing |
| Daily Production Capacity | Up to 1,000 m² per day, depending on product dimensions, thickness and finish |
| Cutting Equipment | 10 cutting machines |
| Fabrication | Solid steps, stair treads, risers and custom-cut stair components |
| Loading Port | Tema Port, Ghana |
Production checks focus on dimensions, thickness, finish consistency, exposed edges, corners and visible damage before the pieces are released for packing.
Finished products are checked before packing, with attention to dimensions, thickness, surface finish, exposed edges, corners and visible damage. Steps and treads are packed in seaworthy wooden crates with separators and edge protection between finished pieces.
For repeat stair sizes, buyers can also provide a piece schedule showing the quantity required for each dimension. This helps organize production, inspection, crate labeling and installation-area identification.
Send your stair drawings, dimensions, finish requirements, quantities and destination port for a cut-to-size review and export quotation.
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Categories
© Copyright: 2026 XIAMEN EXCELLENT STONE CO.,LTD. All Rights Reserved.
IPv6 network supported