Pink Red New Pearl Flower G383 Granite Slabs Tiles Kerb Project

G383 Pink Granite Kerbstone and Outdoor Tile Specifications

A Warmer Alternative to Standard Light-Grey Project Granite

G383 is often described as pink or light red granite, although the actual surface reads as a light pink-grey field with pale feldspar crystals and fine dark mineral grains. The warm mineral areas become more visible on polished or sawn surfaces, while flamed and sandblasted finishes produce a lighter and more textured appearance.

This color range works well when a landscape or municipal package needs more warmth than ordinary sesame-grey stone but still requires a restrained granular pattern. Kerbs, edging and matching tiles can be coordinated within one approved batch so the road edge and adjoining paved areas do not appear to come from unrelated materials.

Buyers coordinating G383 with other slab, tile and fabricated granite formats can compare the wider Granite Products collection before confirming the final material mix.

To compare a lighter pink-grey slab material with a subtler warm grain, review New Rosa Beta G623 Granite slabs before approving the final color range, finish and quantity split.

G383 Granite Kerbstones for Roads and Landscape Edging

G383 kerbstones can be produced from a project section drawing for road edges, pedestrian routes, planting beds, plaza borders and other landscape transitions. The order schedule should state the finished length, width and height together with the visible top and face finish, end treatment and quantity for each section.

Straight rectangular blanks are visible in the production image. Finished projects may also require transition pieces, end units, corner sections or different exposed faces. List these separately rather than counting every unit as one standard kerb, especially when the project combines straight runs with entrances, curves or level changes.

For packages combining kerbs with steps, coping, edging or other outdoor components, review our granite hardscape products for landscape projects and coordinate the finish, dimensions and color range before production.

To compare a cooler grey kerbstone for the same type of application, review G603 Light Grey Granite Kerbstone before fixing the project color and surface finish.

Outdoor Tiles and Cut-to-Size G383 Project Stone

G383 can also be cut into square or rectangular tiles for walkways, courtyards, plazas, wall panels and other project areas. Flamed, sandblasted, sawn or rock-faced finishes are more relevant to outdoor modules, while polished tiles can be considered for selected interior floor and wall applications.

Mixed-size tile programs should identify every module, thickness, finish and quantity. Border pieces and wall caps need their own dimensions and exposed-edge instructions. Slabs may also be quoted for fabricators completing the final cutting locally, but the current page does not provide one verified standard slab-size list.

Zhaoyuan Material Supply and Batch Coordination

G383 is associated with the Zhaoyuan quarry area in Shandong Province. For project orders, current material photographs and finish samples help define the acceptable balance of light-grey background, pale pink crystals and darker mineral grains before cutting begins.

Large orders can be divided by kerb section, tile module, finish and project area. Keeping these groups visible in the production and packing schedule makes quantity checks easier and reduces confusion when several dimensions or surface treatments share the same shipment.

Kerbstone and Tile Quality Control

Inspection should follow the final product schedule rather than treating all G383 pieces as one general stone order. Kerbstones and tiles have different size, surface, edge and packing requirements.

• Material and color: confirm the approved pink-grey range and mineral distribution.
• Kerb sections: check length, width, height, straightness, top finish, exposed face and end treatment.
• Tile modules: verify every length, width, thickness, diagonal, finish and quantity.
• Surface finish: compare flamed, sandblasted, rock-faced, sawn or polished production with the approved sample.
• Special pieces: inspect transitions, corners, end units, caps and border components against the drawing.
• Identification: mark item, section, size, finish, project area and crate quantity.
• Packing: use separators and edge protection inside strong fumigated wooden crates.

Heavy kerbstones require stable support and clear crate weights, while finished tiles need face separation and corner protection. Separate different sections and modules within the packing list so the shipment can be counted and distributed efficiently after arrival.

G383 Pink Granite Kerbstone and Tile FAQ

Is G383 granite pink or grey?

It is best described as light pink-grey. Pale pink or beige feldspar crystals sit within a grey-white background with fine dark mineral grains. The visible shade also changes with the selected finish.

Can G383 be supplied as granite kerbstones?

Yes. The page shows rectangular kerbstone blanks in production. Finished sections, exposed faces, ends and any chamfer or radius should be defined by the project drawing.

Can G383 kerbstone and tile sizes be customized?

Yes, project-specific dimensions can be reviewed. Provide the finished size, thickness, tolerance, finish and quantity because the current page does not publish one fixed standard-size list.

Are flamed, sandblasted and rock-faced G383 finishes available?

Yes. These finishes are listed together with polished, sawn, sanded and tumbled surfaces. Approve the selected finish on an actual sample before production.

Are technical values published for G383 granite?

Yes. The current page lists water absorption, density, flexural strength and compressive strength references. Request the original test source when these values form part of a contractual specification.

Are slabs, outdoor tiles and kerbstones the same purchasing format?

No. Slabs are raw fabrication material, tiles are finished modules and kerbstones are sectional outdoor components. Quote and inspect each product form with its own dimensions, thickness, finish, tolerance and packing requirements.